Hierarchical micro-nanostructured albite-based glass-ceramic for high dielectric strength insulators

A novel glass-ceramic material based on albite type Na-rich feldspar has been synthesized by conventional ceramic process. High crystallinity, >94%?Vol.% is obtained by fast sintering which allows energy saving processing. Albite is the main crystalline phase and tetragonal SiO₂ is a secondary phase. Electrical properties were examined by complex impedance, DC measurements, and dielectric breakdown test. Dielectric characterization shows a non-Debye type dielectric behavior with low dielectric constant, 4.6 at 1?MHz, low dielectric losses, (～10^?3 at 1?MHz, and a large dielectric strength, ～60?kV/mm), that it is the largest value reported in ceramic insulators. Those dielectric properties are attained by the low glassy phase content in the samples and their unique micro-nanostructure. All these properties make this novel material a very promising candidate in the market of ceramic electrical insulator, highlighting for high-voltage applications.     

Flash Sintering using Controlled Current Ramp

In conventional flash sintering, the current rises nonlinearly to a set current limit, accompanied by a spike in the power density. This sudden power spike may cause hot spot formation, in which current preferentially channels through a small area, causing localized melting while other areas remain unsintered. By using a controlled current ramp early on the sudden power spike can be avoided. In addition, by changing the ramp rate material properties such as porosity, grain size and conductivity can be tuned.     

机械制图课改中三维模型库的开发和研究

针对机械制图课程教学中普遍存在的教学模型及挂图数量不足、教学难度大等问题,简述了使用SolidWorks软件建立三维实体模型的过程以及机械制图虚拟模型库的设计流程、内容组成、网络发布等。实践证明,该模型库的设计是成功的,不仅弥补了实物模型库的不足,而且具有更多优势。     

Covalent Immobilization of Tyrosinase on Electrospun Polyacrylonitrile/Polyurethane/Poly(m-anthranilic acid) Nanofibers: An Electrochemical Impedance Study

Polyacrylonitrile/polyurethane/poly(m-anthranilic acid) nanofibers were fabricated by electrospinning. Tyrosinase immobilization was performed by EDC/N-hydroxyl succinimide activation. Covalent binding of tyrosinase onto nanofibers was confirmed by Fourier transform infrared-attenuated total reflectance, and bicinchoninic acid assay revealed the amount of enzyme. Nanofiber morphology and composition were characterized by scanning electron microscopy/energy-dispersive X-ray spectroscopy (EDX). Nanofibers became smoother and thicker after tyrosinase immobilization. Effects of enzyme on nanofibers were investigated by electrochemical impedance spectroscopy and the data were fitted to equivalent electrical circuit model. EDX-mapping showed uniform distribution of enzyme. The solution resistance and charge transfer resistance of nanofibers decreased after enzyme immobilization.     

Effects of Winding Attachment Positions on Output Characteristics of Flux‐Modulating Synchronous Machines

The flux‐modulating synchronous machine (FMSM) is a new type of multipole SM with nonoverlapping concentrated armature and field windings on the stator. This paper compares the output characteristics of two FMSMs through finite element analysis (FEA) and experiments. In both of the FMSMs, the attachment positions of the armature and field windings are swapped. To determine the reason for the discrepancies in their output characteristics, unsaturated inductances were calculated using a d‐‐q equivalent circuit. In addition, the calculated results of the inductances were confirmed through a visualization of the leakage fluxes using FEA. The results of the study show that the synchronous inductance can be reduced by attaching the armature winding to the air‐gap side of the stator teeth and that the reduction leads to an increase in output power.     

谐振变换器的ZVS软开关同步整流技术研究

以感应电能传输(IPT)谐振变换器为研究对象,研究了谐振变换器的ZVS同步整流(SR)技术。分析了基于SR技术IPT谐振变换器的工作原理,利用系统的谐振工作特性,提出了一种新颖的ZVS软开关SR实现方法。建立了系统频闪映射稳态数学模型,给出了ZVS软开关SR的周期不动点函数、数值求解状态变量及ZVS软开关SR工作周期的算法流程。在设计控制电路的基础上,通过实验验证了提出的同步整流技术的可行性。     

The validation and further development of a multidimensional cognitive load scale for virtual environments

Measuring cognitive load is important in virtual learning environments (VLE). Thus, valid and reliable measures of cognitive load are important to support instructional design in VLE. Through three studies, we investigated the validity and reliability of Leppink's Cognitive Load Scale (CLS) and developed the extraneous cognitive load (EL) dimension into three sub-scales relevant for VLE: EL instructions, EL interaction, and EL environment. We investigated the validity of the measures using the Partial Credit Model (PCM), Confirmatory Factor Analysis (CFA), and correlations with retention tests. Study 1 (n = 73) investigated the adapted version of the CLS. Study 2 describes the development and validation of the Multidimensional Cognitive Load Scale for Virtual Environments (MCLSVE), with 140 students in higher education. Study 3 tested the generalizability of the results with 121 higher education students in a more complicated VLE. The results provide initial evidence for the validity and reliability of the MCLSVE.     

基于DSP的多元数据同步采集与存储系统的设计与实现

从硬件和软件两个角度出发,介绍基于DSP的多元数据同步采集与存储系统的组成、工作模式以及功能的测试。系统主要由上位机和数字采集与存储单元组成,其中数字采集与存储单元的硬件部分包括电源模块,值班电路模块,数据采集模块,数据存储模块,时钟同步模块。系统采用DSP作为中央处理芯片,利用经过同步后的秒脉冲作为触发信号,实现同步数据采集。以CF卡作为存储介质,实现数据自容式存储。软件部分实现自检、同步、数据采集存储功能。经过测试,系统工作稳定,功能正常,同步精度在100ns以内。